Commissioning and Start-Up Activities of Coal Power Plants: Preparation, Planning, Pre-Commissioning Checks and Tests, Commissioning Schedule, Detailed Commissioning Procedures and Instructions for each Equipment in a Coal Power Plant, Instrumentation, Trial Run of each Equipment, Safety and Precautions, Commissioning of Coal Power Plant Systems, Safety Rules Clearance Certificates, Procedure for the Control and Handling of Defects, Commissioning Reports (3.0 CEUs)
|
Course Code:
|
MEC083
|
|
Date:
|
22 Feb
-
26 Feb 2021
|
|
Location:
|
Toronto Airport West
5444 Dixie Rd
Mississauga, ON
L4W 2L2
Note: Please do not book travel and accommodation until you receive course confirmation.
|
|
A certificate of completed Continuing Education Units (CEUs) will
be granted at the end of this course. |
 |
Daily Schedule:
8:00am - Registration and coffee (1st day only)
8:30am - Session begins
4:30pm - Adjournment
Breakfast, two refreshment breaks and lunch are provided daily. Introduction This seminar provides a comprehensive understanding of all the commissioning and start-up activities of coal power plants. The Commissioning Management System of coal power plants is covered in detail in this seminar. This includes all the commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report. The seminar provides also a thorough understanding of all the commissioning requirements for boiler and auxiliaries, turbines and auxiliaries, generator and auxiliaries, electrical equipment, switchgear equipment, switchgear, and transformers. All the stages of the commissioning procedure are covered in-depth in this seminar. This includes preparation – planning various activities, pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component in a coal power plant, instrumentation, trial run of the equipment, safety and precautions, commissioning of coal power plant systems, Safety Rules Clearance Certificates, procedure for the control and handling of defects, Commissioning Reports. This seminar is a MUST for anyone who is involved in the pre-commissioning or commissioning of any coal power plant equipment because it provides detailed pre-commissioning checks and tests and detailed tests and commissioning procedures and instructions for every component in a coal power plant. In addition, the seminar provides in-depth coverage of all preparation, planning activities, commissioning schedules, trial run of each coal power plant equipment, safety and precautions, Safety Rules Clearance Certificates, Procedures for handling defects, and Commissioning Reports.
Who Should Attend - Engineers of all disciplines
- Managers
- Technicians
- Maintenance personnel
- Other technical individuals
Seminar Outcome - Pre-Commissioning Checks and Tests, Detailed Tests and Commissioning Procedures and Instructions for Every Equipment in Coal Power Plants: Gain a thorough understanding of all pre-commissioning checks and tests, and all commissioning procedures and instructions for every equipment in coal power plants
- Commissioning Management System of Coal Power Plants: Discover the benefits of the Commissioning Management System of coal power plants including all commissioning procedures and documents, purpose of commissioning, responsibilities, system description, organization, working parties, test teams, documentation, testing and commissioning schedules, test reports, safety, plant certification, and plant completion report
- Commissioning Procedures and Instructions for Boiler and Auxiliaries in Coal Power Plants: Learn about the commissioning procedures and instructions for boiler and auxiliaries including all commissioning activities, typical commissioning schedule, hydraulic test and wet preservation, air and gas tightness test, trial run of equipment, electronic precipitators, fuel oil system, preparation for first light up, alkali boil – out, acid cleaning and passivation, thermal flow test of economizer, water walls, and superheater, valves, steam boiling, safety valve setting, and soot blowers.
- Commissioning Procedures and Instructions for Turbine and Auxiliaries: Gain a thorough understanding of all the commissioning procedures and instructions for turbine and auxiliaries including acid cleaning of oil pipelines, lubrication and governing system (oil flushing and hydraulic testing), jacking oil system, governing system, regenerative system, barring gear, vacuum tightness test, first rolling of turbine and data logging
- Commissioning Procedures and Instructions for Generator and Auxiliaries: Discover all the commissioning procedures and instructions for generator and auxiliaries including generator, seal oil system, hydrogen gas system, stator water system, rolling and payment of generator
- Commissioning Procedures and Instructions for Electrical Equipment: Learn about all the commissioning procedures and instructions for electrical equipment including switchyard equipment, switchgear, transformers, and motors
- Coal Power Plant Equipment and Systems: Learn about various coal power plant equipment and systems including: boilers, superheaters, reheaters, steam turbines, governing systems, deaerators, feedwater heaters, coal-handling equipment, transformers, generators and auxiliaries
Training Methodology The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.
Special Feature Each delegate will receive a digital copy of relevant materials from the following written by the instructor: - “POWER GENERATION HANDBOOK” second edition published by McGraw-Hill in 2012 (800 pages)
- Excerpt of the relevant chapters from the “POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE” published by McGraw-Hill in 2012 (800 pages)
- COAL POWER PLANT COMMISSIONING MANUAL (includes practical information about all pre-commissioning checks and tests, typical commissioning schedule, detailed tests and commissioning procedures and instructions for every component and system in coal power plants - 300 pages)
To register for this course click on the register button above, or by fax. To register
by fax, download and fill our registration form,
then fax it to (888) 849-4871. Mail your cheque to our address
. If you have a question regarding this course, please click
here.
P.S. GIC can offer many of our courses at a location of your choice, at your convenience
and tailored to your special needs. For more information, please contact us.
Course Materials:
Each participant will receive a complete set of course notes and handouts that will
serve as informative references.
GIC reserves the right to cancel or change the date or location of its events. GIC's responsibility will, under no circumstances, exceed the amount of the fee collected. GIC is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for
complete policies.
|
|