Distance - Combustion Engineering for Coal Fired Power Plants: Boiler Equipment, Boiler Piping and Instrument Diagrams, NFPA 85 Code (Boiler and Combustion Systems Hazards Code), Combustion Control, Oxygen Trim, Control of Air and Coal Flow into the

Course Code: MEC095d

ARE YOU:

Looking for professional development but do not have the time to take off from work?
Looking for refresher course on specific engineering topics and cannot find an intensive course to serve your needs?
This may be your ideal Professional Development course!

Find out more on how the Professional Development Distance Program may work for you - Click here

Duration:

This course is approximately 4-5 weeks in duration.

Learning Method:

The PDDP program is more of a self-guided learning style.
You are required to read the notes and materials given, complete the follow-up assignments on your own, send in your questions prior to your 1 hour webinar meeting (if required) and be involved in live discussion via the internet.
Once you have completed the course, you will receive a certificate of completion

Introduction

This seminar provides detailed description of all combustion equipment and systems used in pulverized coal boilers and circulating fluidized bed (CFB) boilers including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans. This seminar provides also a comprehensive explanation of all boiler combustion control systems including pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system as well as their tuning methods. All boiler control systems are covered as well in this seminar including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, boiler-turbine coordinated control, etc. The seminar provides also detailed explanation of Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code). The burner management systems (BMS) and examples of boiler permissive starting logic and protective tripping logic will be explained thoroughly. The various methods used to calculate the boiler efficiency are covered in detail in this seminar including the direct and indirect methods. All the factors which affect the efficiency and emissions of pulverized coal boiler and CFB boiler will be explained thoroughly. The seminar covers also all the methods used to improve the efficiency of pulverized coal boilers and CFB boilers including improvement to their combustion efficiency and control systems performance.

Who Should Attend

Engineers of all disciplines
Managers
Technicians
Maintenance personnel
Other technical individuals

Seminar Outcome

Boiler Combustion Equipment and Systems: Gain an in-depth understanding of all boiler combustion equipment and systems including pulverized coal burning systems, coal feeder, pulverizer and classifier, pulverized coal burners, furnace and fans
Boiler Combustion Control Systems: Gain a thorough understanding of all boiler combustion control systems for pulverized coal boilers, and CFB boilers including
pulverizer control system, combustion control, control of coal and air flow into the boiler, furnace pressure control, oxygen trim control, nitrogen oxides (NOx) and sulfur oxides (SOx) control, control of ammonia injection, flue gas dew point control, purge control, flame monitoring and tripping system
Boiler Conventional Control Systems: Gain an in-depth understanding of all boiler conventional control systems including drum level feedwater control, main steam and reheat steam temperature control, boiler limits and runback, sliding or variable pressure control, heat rate optimization with sliding pressure control, and boiler-turbine coordinated control
Boiler NFPA 85 Code (Boiler and Combustion Systems Hazards Codes) and American National Standard Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code): Learn about NFPA 85 code and ANSI/ISA-77-44-01-2007 code
Burner Management System and Boiler Permissive Starting Logic and Protective Tripping Logic: Gain an in-depth understanding of burner management system and boiler permissive starting logic and protective tripping logic
Boiler Efficiency Calculations: Learn how to calculate the boiler efficiency using the direct and indirect methods
Factors Affecting the Efficiency and Emissions of Boilers: Understand all the factors which affect the boiler efficiency and emissions
Methods Used to Improve the Efficiency of Boilers: Learn about all the methods used to improve the efficiency of pulverized coal boilers, and CFB boilers including improvement to their combustion efficiency and control systems performance
Boiler Instrument and Piping Diagrams: Gain an in-depth understanding of all boiler instrument and piping diagrams
CFB and Pulverized Coal Boilers Equipment and Systems: Learn about various types of equipment and systems used in CFB and pulverized coal boilers including economizers, steam drum, superheaters, air preheaters, ammonia injection systems, etc.

Training Methodology

The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.

Special Feature

Each delegate will receive a digital copy of the following materials written by the instructor:

Excerpt of the relevant chapters from the “POWER GENERATION HANDBOOK” second edition published by McGraw-Hill in 2012 (800 pages)
Excerpt of the relevant chapters from the “POWER PLANT EQUIPMENT OPERATION AND MAINTENANCE GUIDE” published by McGraw-Hill in 2012 (800 pages)
COMBUSTION ENGINEERING FOR COAL FIRED POWER PLANTS MANUAL (includes practical information about combustion engineering for coal fired power plants - 500 pages)

The PDDP Distance Education program works as follows:

Once you register for this course, you will be sent a login username and password for our online distance website.

You will receive the course notes in hard copy through the online website, you will receive a set of notes each week covering the course material.
A one hour video-conference session will be conducted by your instructor each week (if required). The objective of this session is to assist in solving the assignments, as well as answer student questions that should be sent to instructor early enough prior to the meeting time. In addition with being able to communicate with the instructor, you will also be able to communicate with other students in the same class and watch their questions being answered as well. (A high speed internet connection is strongly recommended for this feature).
Each set of exercises can be completed and submitted by the indicated date and your completed exercise will be marked online and and returned by your instructor.
To gain the most from your course, it is highly recommended that you participate fully in all discussions and exercises. Please remember that each course has a form of quiz or exercise at the end to test your understanding of the material. You will be informed of these dates when you receive the course schedule.

*Course commencement date is subject to instructor availability.

Philip Kiameh

Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 24 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as "Excellent" or "Very Good" by the delegates who attended his seminars and lectures.

Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:

Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).

Prof. Kiameh has received the following awards:

The first "Excellence in Teaching" award offered by the Professional Development Center at University of Toronto (May, 1996).
The "Excellence in Teaching Award" in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
Entrance Scholarship to University of Ottawa (1984).
Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).

Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 30 years of practical engineering experience with Ontario Power Generation (formerly, Ontario Hydro - the largest electric utility in North America).

While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.

Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.

Professor Philip Kiameh was awarded his Bachelor of Engineering Degree "with distinction" from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.

Basic Boilers, Furnace, Economizer, Superheaters, Boiler Drums, Piping and Instrument Diagrams, NFPA 85 Code (Boiler and Combustion Systems Hazards Code), Coal Handling and Preparation for Firing, Control of Boilers, Boiler Capacity and Performance, Combustion of Fuels, Excess Air, and Products of Combustion, Furnace Draft, Drum Level Feedwater Control

Basic Boilers
Boiler Components
Furnace
Fans
Windbox
Flue Gas Heat Exchangers
Combustion Air Preheater
Economizer
Superheater
Boiler Drums
Piping and Instrument Diagrams
Design Basis Checklist
Steaming Process
Boiler Capacity and Performance
Boiler Mass and Energy Balances
Boiler Efficiency Calculation Methods: Direct Method and Heat Loss Method
Process of Managing the Energy and Mass Balances in a Boiler
Relationships Between Boiler Inputs and Outputs
Control of Boilers
Control Strategies
Bumpless Transfer
NFPA 85 Code (Boiler and Combustion Systems Hazards Code)
Coal Handling and Preparation for Firing
Fuel Mixtures: Coal-Oil; Coal-Water
Physical Combustion Requirements
Combustion Chemistry and Products of Combustion
Theoretical Air Requirements and Relationship to Heat of Combustion
Requirement for Excess Combustion Air
Interlock Circuitry
Furnace Draft
Pressure Fired Boilers
Balanced Draft Boiler Fans
Furnace Pressure control
Feedwater
Once-Through Boilers
Drum Level Feedwater Control
Feedwater Control
Shrink and Swell

Coal Fired Boilers, Pulverized Coal Boilers, Circulating Fluidized Bed Boilers, Firing Rate Demand for Boilers, Relationship Between the Steam Pressure Variations and Changes in Firing Rate, Matching the Boiler Firing Rate Demand to Electrical Load (Boiler-Turbine Coordination), Boiler Following-Firing Rate Demand Development, Boiler-Turbine Coordinated Control, Fuel and Air Control, Oxygen Trim Control, Boiler Trip Interlocks, Heat Rate Optimization with Sliding Pressure Control

Coal Fired Boilers
Pulverized Coal Fired Boilers
Raw Coal and Feeder
Circulating Fluidized Bed Boilers
Steam Supply System
Fire Rate Demand for Boilers
Relationship between the steam pressure variations and changes in firing rate
Load Sharing of Multiple Boilers
Pre-allocation of Boiler Load based on Test Results
Energy Management by Boiler Load Allocation on a Least Cost Basis
Matching the Boiler Firing Rate Demand to Electrical Load (Boiler-Turbine Coordination)
Boiler Load Measurement
Unit Load Demand Development
Boiler Following-Firing Rate Demand Development
Turbine-Following-Throttle Pressure Control with the Turbine Valves
Boiler-Turbine Coordinated Control
Sliding or Variable Pressure Control
Heat Rate Optimization with Sliding Pressure Control
Digital Interlock of Boilers and Tracking Control Modes
Main Steam and Reheat Steam Temperature Control
Temperature variation with Boiler Load
Fuel and Air Control
Fuel and Air Control Characterization
Excess Air to Oxygen
Multiple Fuel Control
Oxygen (O2) Trim Control
Flue Gas Dew Point Control
Soot Blowing
Multiple Boilers
Pumping and Firing Rate for Once-Through Boilers
Main Steam and Reheat Steam Temperature Control Strategies
Three Element Control for Spray Attemperator
Boiler Trip Interlocks
Boiler Limits and Runback

Burner Management Systems, Flame Monitoring and Tripping System, Examples of Permissive Starting Logic and Protective Tripping Logic Environment, Pulverized Coal Burning System, Combustion Control for Pulverized Coal-Fired Boilers, Nitrogen Oxide Control, Controlling of Ammonia Injection, Steam Temperature Control, Principles and Methods of Transient Superheat Steam Temperature Control, American National Standards Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code), Combustion Process, Control of Pulverized Coal-Fired Boilers, Control of Circulating Fluidized Bed Boilers

Burner Management Systems
Burner Management System (BMS) Control
NFPA85 Code (Boiler and Combustion Systems Hazards Code)
Boiler Control and Operating Documentation
Main Fuel Trip
Requirement for Independence of Control (Hardware/Software)
Flame Detection
Flame Monitoring and Tripping System (Multiple Burner Boilers – Class 1 Igniter, Class 2 Igniter, Class 3 Igniter)
Flame Tripping Validation
Safety Shutoff Valves
Examples of Permissive Starting Logic and Protective Tripping Logic
Pulverized Coal Burning Systems
The Coal Feeder
The Pulverizer and Classifier
The Primary Air Fan or Exhauster Fan and the Coal Drying System
Pulverizer Control Systems
Compartmented Windbox Pulverized Coal Boilers
Start-up and Management of Pulverizers and Their Burners
Combustion Process
Basic Combustion Control Strategies
Excess Air Requirements Concepts
Control of Pulverized Coal-Fired Boilers
Pulverizer Dynamics
Ball Tube Pulverizers
Non-Ball Tube Mills
Pulverizer Coal-Air Control System
Reference for Pulverizer Control
Duel Fuel Firing
Combustion Control for Pulverized Coal-Fired Boilers
Coal Heat Compensation
The Use of Multiple Pulverizers
The Combustion Control System for Pulverized Coal as a Single Fuel
Pulverized Coal in Combination with Liquid or Gaseous Fuels
Circulating Fluidized Bed Boiler Combustion Control
Flue Gas Analysis vs. Boiler Load
PPM CO vs. PPM Total Combustible Gases
Pulverized Coal Burners
Nitrogen Oxides (NOx) and NOx Control
Controlling Ammonia Injection
Sulfur oxides (SOx) control
Excess Air to Oxygen
Steam Temperature Control by Ratio Adjustment
Principles and Methods of Transient Superheat Steam Temperature Control
Steam Temperature Feedback Control
Load Index Development
Transient Correction Signal Development
Use of Cascade Spray Valve Control
Advanced Steam Temperature Control
American National Standards Institute/Instrument Society of America Code (ANSI/ISA-77-44-01-2007 Code)

TLNT reserves the right to cancel or change the date or location of its events. TLNT's responsibility will, under no circumstances, exceed the amount of the fee collected. TLNT is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at: [email protected] or click here to submit an online request.