Gas Turbines and Co-Generation Plants (1.8 CEUs)

Name: Gas Turbines and Co-Generation Plants (1.8 CEUs)
Price: 1695 CAD
Availability: InStock

Course Code: MEC058

Description

This seminar will cover all aspects of gas turbines and co-generation plants. This seminar will cover in detail all the components of these types of plants such as: compressors, combustors, gas turbines, heat recovery steam generators, lubricating systems, instrumentation, control systems, transformers, and generators. The design, selection considerations, operation, maintenance, pay-back period, economics of gas turbines and co-generation plants, as well as emission limits, reliability, monitoring and governing systems are also covered in detail. This seminar will also provide up-dated information in respect to all the significant improvements that have been made to gas turbines and co-generation plants during the last two decades.

This seminar will illustrate through sophisticated computer simulation how gas turbines and co-generation plants perform under steady-state and transient conditions.

In addition, the delegates will learn how to use the computer simulation program which provides the following benefits:

Allow the operator to extend the gas turbine operating period by avoiding unnecessary outages and maintenance activities.
Determination of essential gas turbine maintenance activities to reduce the duration of outages.
Profit optimization of gas turbines and co-generation plants.
Minimization of the environmental emissions of gas turbines and co-generation plants.

Who Should Attend

Engineers of all disciplines
Managers
Technicians
Maintenance personnel
Other technical individuals

Seminar Outcome

Computer Simulation of Gas Turbine and Co-Generation Plants: Gain a thorough understanding of computer simulation of gas turbines, and co-generation plants.
Gas Turbine and Co-Generation Plants Components and Systems: Learn about all components and subsystems of the various types of gas turbines and co-generation plants.
Gas Turbine and Co-Generation Plants Economics: Examine the advantages, applications, performance and economics of gas turbines and co-generation plants.
Gas Turbine and Co-Generation Plant Equipment: Learn about various gas turbine and co-generation plant equipment including: compressors, combustors, turbines, governing systems, heat recovery steam generators, transformers, generators and auxiliaries.
Gas Turbine and Co-generation Plant Maintenance: Learn all the maintenance activities required for gas turbines, co-generation plants, transformers, and generators to minimize their operating cost and maximize their efficiency, reliability, and longevity.
Gas Turbine and Co-Generation Plants Environmental Emissions: Learn about the monitoring and control of environmental emissions from gas turbines and co-generation plants.
Gas Turbine and Co-Generation Plants Instrumentation and Control Systems: Learn about the latest instrumentation and control systems of gas turbines and cogeneration plants.
Gas Turbine and Co-Generation Plants Reliability and Testing: Increase your knowledge of gas turbine and cogeneration plants predictive and preventive maintenance, reliability and testing.
Gas Turbine and Co-Generation Plants Selection and Applications: Gain a detailed understanding of the selection considerations and applications of gas turbines and co-generation plants.
Gas Turbine and Co-Generation Plants: Learn about the reliability, life cycle cost, profitability, refurbishment, and life extension methods for all types of gas turbines and co-generation plants.

Training Methodology

The instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all the delegates gain a complete understanding of all the topics covered. The training environment is highly stimulating, challenging, and effective because the participants will learn by case studies which will allow them to apply the material taught to their own organization.

Special Feature

Each delegate will receive an excerpt, in digital form, of the relevant chapters from the Manual listed below authored by the instructor:

1. “POWER GENERATION HANDBOOK - 2nd edition” published by McGraw-Hill in 2011 (800 pages)

2. Practical manual (300 pages)

Philip Kiameh

Philip Kiameh, M.A.Sc., B.Eng., D.Eng., P.Eng. (Canada) has been a teacher at University of Toronto and Dalhousie University, Canada for more than 24 years. In addition, Prof Kiameh has taught courses and seminars to more than four thousand working engineers and professionals around the world, specifically Europe and North America. Prof Kiameh has been consistently ranked as "Excellent" or "Very Good" by the delegates who attended his seminars and lectures.

Prof Kiameh wrote 5 books for working engineers from which three have been published by McGraw-Hill, New York. Below is a list of the books authored by Prof Kiameh:

Power Generation Handbook: Gas Turbines, Steam Power Plants, Co-generation, and Combined Cycles, second edition, (800 pages), McGraw-Hill, New York, October 2011.
Electrical Equipment Handbook (600 pages), McGraw-Hill, New York, March 2003.
Power Plant Equipment Operation and Maintenance Guide (800 pages), McGraw-Hill, New York, January 2012.
Industrial Instrumentation and Modern Control Systems (400 pages), Custom Publishing, University of Toronto, University of Toronto Custom Publishing (1999).
Industrial Equipment (600 pages), Custom Publishing, University of Toronto, University of Toronto, University of Toronto Custom Publishing (1999).

Prof. Kiameh has received the following awards:

The first "Excellence in Teaching" award offered by the Professional Development Center at University of Toronto (May, 1996).
The "Excellence in Teaching Award" in April 2007 offered by TUV Akademie (TUV Akademie is one of the largest Professional Development centre in world, it is based in Germany and the United Arab Emirates, and provides engineering training to engineers and managers across Europe and the Middle East).
Awarded graduation “With Distinction” from Dalhousie University when completed Bachelor of Engineering degree (1983).
Entrance Scholarship to University of Ottawa (1984).
Natural Science and Engineering Research Counsel (NSERC) scholarship towards graduate studies – Master of Applied Science in Engineering (1984 – 1985).

Prof. Kiameh performed research on power generation equipment with Atomic Energy of Canada Limited at their Chalk River and Whiteshell Nuclear Research Laboratories. He also has more than 30 years of practical engineering experience with Ontario Power Generation (formerly, Ontario Hydro - the largest electric utility in North America).

While working at Ontario Hydro, Prof. Kiameh acted as a Training Manager, Engineering Supervisor, System Responsible Engineer and Design Engineer. During the period of time that Prof Kiameh worked as a Field Engineer and Design Engineer, he was responsible for the operation, maintenance, diagnostics, and testing of gas turbines, steam turbines, generators, motors, transformers, inverters, valves, pumps, compressors, instrumentation and control systems. Further, his responsibilities included designing, engineering, diagnosing equipment problems and recommending solutions to repair deficiencies and improve system performance, supervising engineers, setting up preventive maintenance programs, writing Operating and Design Manuals, and commissioning new equipment.

Later, Prof Kiameh worked as the manager of a section dedicated to providing training for the staff at the power stations. The training provided by Prof Kiameh covered in detail the various equipment and systems used in power stations.

Professor Philip Kiameh was awarded his Bachelor of Engineering Degree "with distinction" from Dalhousie University, Halifax, Nova Scotia, Canada. He also received a Master of Applied Science in Engineering (M.A.Sc.) from the University of Ottawa, Canada. He is also a member of the Association of Professional Engineers in the province of Ontario, Canada.

Day 1 - Steam Generators, Turbines, Co-Generation Plants, Gas
Turbines, Turbine Governing Systems, Compressor Stall
and Surge–

Review of Thermodynamics Principles
Steam Generators
Efficiency and Heat Rates
Co-generation Plants
Arrangement of Co-generation plants
Economics of Co-generation Plants
The Steam Drum
Superheaters and Reheaters
Once-Through Boilers
Economizers
Fans
The Stack
Steam Generator Control
Feedwater and Drum-Level Control
Steam-Pressure Control
Steam-Temperature Control
Turbine components
Rotating and Stationary blades
Thrust bearings
Labyrinth seals
Turbine controls
Testing of Turbine blades
Quality Assurance of Turbine Generator Components
Assembly and testing of turbine components
Turbine Control Systems
Steam Generators, Heat Exchangers, and Condensers
Power Station Performance Monitoring
The Turbine Governing Systems
Turbine Protective Devices
Turbine Instrumentation
Lubrication Systems
Gland Sealing System
Frequently Asked Questions about Turbine-Generator Balancing, Vibration Analysis and Maintenance
Gas Turbine Fundamentals
Overview of Gas Turbines
Gas Turbine Design
Gas Turbine Calculations
Gas Turbine Applications in Power Stations, Gas Turbine Protective Systems, and Tests
Gas Turbine Compressors
Dynamic Compressors Technology
Compressors Auxiliaries, Off-Design Performance, Stall, and Surge
Centrifugal Compressors Components, Performance Characteristics, Balancing, Surge Prevention Systems, and Testing
Dynamic Compressors Performance
Compressor Seal Systems
Dry Seals, Advanced Sealing Mechanisms, and Magnetic Bearings

Day 2 - Gas Turbine Components and Auxiliaries, and Computer
Simulation of Gas Turbines–

Gas Turbine Combustors
Axial-Flow Turbines
Gas Turbine Materials
Gas Turbine Lubrication and Fuel Systems
Gas Turbine Bearing and Seals
Gas Turbine Instrumentation and Control Systems
Gas Turbine Performance Characteristics
Gas Turbine Operating and Maintenance Considerations
Gas Turbine Emission Guidelines and Control Systems
Effects of ambient temperature and pressure on gas turbine performance
Simulation of effects of component deterioration on engine performance
Power Augmentation
Simulation of engine control system performance
Profits, Revenue and Life Cycle Cost Analysis
Non-Dimensional Analysis
Computer Simulation Applications
Computer Simulation of Gas Turbines and Combined Cycles Exercises and Solutions

Day 3 - Co-generation Plants, Power Enhancement Options,
Transformers and Generators–

Absorption Chillers
Selection of The Best Power Enhancement Option for Co-generation plants
Applications of Co-generation Plants
Selection Considerations of Co-generation Plants
Co-generation Application Considerations
University of Toronto Central Steam, Co-generation and District Heating Plant
Economics of Combined Cycles Co-generation Plants
Fundamentals of Electric Systems
Introduction to Machinery Principles
Transformers
Transformers Components and Maintenance
AC Machine Fundamentals
Synchronous Generators
Generator Components, Auxiliaries, and Excitation
Generator Testing, Inspection, and Maintenance
Multiple-Choice Questions

TLNT reserves the right to cancel or change the date or location of its events. TLNT's responsibility will, under no circumstances, exceed the amount of the fee collected. TLNT is not responsible for the purchase of non-refundable travel arrangements or accommodations or the cancellation/change fees associated with cancelling them. Please call to confirm that the course is running before confirming travel arrangements and accommodations. Please click here for complete policies.

We could offer any of our courses at a location of your choice and customized contents according to your needs, please contact us at: [email protected] or click here to submit an online request.